Protection System Isolation Bundle
Product Description:
Bundle Includes:
- LD-070 Protection System
- Holds disposable or reusable gowns, aprons, or coveralls/jumpsuits, three boxes of gloves, one box of ear loop masks, and one box of shield masks
- Quartz Beige ABS Plastic
- MB-600 Hanger - Door - Standard
- Hooks over top of door no thicker than 2.44"
- Quartz Beige Powder-Coated Steel
Primary Area for Product Usage:
- Anywhere protective equipment products are needed
Dispenses:
- Top: Box(es) no larger than 5.00"W x 10.00"H x 4.49"D (12.7 cm x 25.4 cm x 11.4 cm)
- Bottom left: Gowns, aprons, or coveralls/jumpsuits no larger than 11.38"W x 15.30"H x 4.53"D (28.9 cm x 37.4 cm x 11.5 cm)
- Middle right: Box(es) no larger than 8.39"W x 5.24"H x 4.49"D (21.3 cm x 13.3 cm x 11.4 cm)
- Bottom right: Box(es) no larger than 8.39"W x 9.80"H x 4.49"D (21.3 cm x 24.9 cm x 11.4 cm)
Consumables not included
ABS Plastic
Material Characteristics
Designed for Long-Term, Heavy-Duty Applications
The combination of copolymers (Acrylonitrile, Butadiene, and Styrene) gives ABS an excellent combination of strength, rigidity, and toughness.
ABS is chemical, stress-crack resistant, dimensionally stable, and will hold up to long-term use. It possesses high strength and performance characteristics at a reasonable cost.
Care and Cleaning
Use mild soap and water to clean. Petroleum-based oils, solvents, and paints should not be used.
Standard hospital cleaning supplies are approved for use on our ABS plastic products.
Powder-Coated Steel
Material Characteristics
Designed for Long-Term Use
Our steel dispensers and stands are coated with polyester powders which makes them highly resistant to corrosion.
Powder-coated steel is ideal for dispensers used in a healthcare or an industrial setting because it is impact resistant and is not effected by extremes in temperature.
Dispensers and stands made of powder-coated steel are both attractive and functional, providing years of service.
Care and Cleaning
For best results, clean by washing the surface with a diluted solution of a mild, non-abrasive detergent in cold or warm water and a non-abrasive cloth. Standard hospital cleaning supplies can be used.
Dry with a soft cloth. Do not use any solvent-based materials, abrasives (e.g. Scotch-brite, steel wool), or apply excessive force during cleaning.